TM 9-2330-383-14&P
4-33. SPLASH GUARDS (CONT)
INSTALLATION
a. For front splash guard, install splash guard (11), four screws (12), mounting
bar (10), four washers (9), lockwashers (8) and nuts (7).
b. For rear splash guard, install splash guard (6), mounting bar (5), and four
screws (3), lockwashers (2), washers (4) and nuts (1).
END OF TASK
4-34. SAFETY CHAINS
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit
Socket, 1-5/16-inch, 3/4-inch drive
Materials/Parts
Cotter pin (2)
REMOVAL
For each chain, remove cotter pin (1), pin (2) and shackle (3) with safety chain
(4). Slide shackle (3) from chain link.
4-72
