TM 9-2330-383-14&P
4-38. TOWBAR (CONT)
INSTALLATION
a. Install towbar (3) and insert pin (4) through towbar (3), slot in pivot
housing and towbar pivot (9).
b. Install two bushings (5), making sure the flats aline with and go into slots
in pivot housing.
c. Install two nuts (2), tightening nuts (2) until shoulders on bushings (5)
seat firmly against towbar flange, then back off one-quarter turn.
d. Install two grease fittings (1). Grease until grease runs out of the
fittings.
e. Reconnect short tie rod (8) and install nut (7) and cotter pin (6).
END OF TASK
4-80
