TM 9-2330-384-14&P
2-22. REMOVAL AND INSTALLATION OF GRABHANDLE.
a. REMOVAL.
(1)
Remove two lockpins (2) from
holes in two mounting brack-
ets (3) and grabhandle (1).
(2) Remove grabhandle (1).
b. INSTALLATION.
(1) Slide grabhandle (1) inside
two mounting brackets (3).
(2) Aline holes and install two
lockpins (2).
2-23. USE OF CONVOY WARNING LIGHT.
a.
INSTALLATION.
WARNING
Grabhandles on top of semitrailer are dismountable. Ensure that they are securely
mounted before using them. Failure to follow this warning may result in serious injury to
personnel.
Use extreme caution when working or walking on top of semitrailer. Walkway can be-
come slippery due to moisture or fuel spillage. Failure to follow this warning may result
in serious injury to personnel.
(1)
Unstow lockpin (8) by removing from holes in mounting bracket (9).
(2)
Slide holder tube of convoy warning light (1) into mounting bracket (9). Rotate convoy
warning light so that cable (2) can reach receptacle (7) with cable routed to outside of
grabhandle (3). Aline holes in holder tube and mounting bracket, and install lockpin
(8).
(3)
Remove cap (6) from receptacle (7). Remove cap from cable plug (4).
(4)
Install cable plug (4) into receptacle (7) alining cable plug with slot in receptacle.
Tighten ring (5) to secure connection.
(5)
Install cap of cable plug (4) into cap (6) of receptacle (7) to help keep cap threads
clean.
(6)
Turn on convoy warning light toggle switch (see paragraph 2-2).
2-50
