TM 9-2330-384-14&P
4-15. RESISTOR REPLACEMENT.
a.
Removal
Installation
b.
Equipment Conditions:
Materials/Parts:
Ref Conditions
l
4-14 Voltage control unit removed.
l
Tools:
Shop equipment, automotive maintenance
l
and repair, organizational maintenance,
common no. 1
l
a. REMOVAL
NOTE
There are two resistors (1) mounted
to voltage control unit cover (5). Each
resistor is removed the same.
(1) Unsolder two wires (4) from re-
sistor (1) .
(2) Remove two nuts (2), lockwash-
ers, and screws (3). Remove re-
sistor (1) from voltage control
unit cover (5). Discard lock-
washers.
b. INSTALLATION
NOTE
There are two resistors (1) mounted
to voltage control unit cover (5). Each
resistor is installed the same.
(1)
Install resistor (1) to voltage con-
trol unit cover (5) with two screws
(2).
4-36