TM 9-2330-384-14&P
4-18. LAMP REPLACEMENT.
a.
Removal
b.
Installation
Equipment Conditions:
Materials/Parts:
Ref Conditions
Corrosion preventive compound (Item 7,
nected from semitrailer.
General Safety Instructions:
Tools:
When performing electrical maintenance,
ALWAYS disconnect intervehicular electri-
Tool kit, general mechanic's
cal cable from semitrailer.
a. REMOVAL
WARNING
When performing electrical maintenance, ALWAYS disconnect inter-
vehicular electrical cable from semitrailer. Failure to follow this warning
may create a spark and explosion, resulting in serious injury or death to
personnel.
CAUTION
Use caution when removing lens (6).
(1)
Use a screwdriver to carefully lift up on lens (3) and remove. Remove lamp (1).
(2) If preformed packing (2) is damaged, replace.
b. INSTALLATION
WARNING
When performing electrical maintenance, ALWAYS disconnect inter-
vehicular electrical cable from semitrailer. Failure to follow this warning
may create a spark and explosion, resulting in serious injury or death to
personnel.
(1) Install lamp (1).
(2)
Apply a thin coat of corrosion preventive compound to sealing lip of lens (3). Install lens.
4-42
