TM 9-2330-384-14&P
4-24. FRONT CLEARANCE AND MARKER LIGHT MAINTENANCE (Con't).
(6)
Loosen grommet (7). Pull brown wire (11) through front clearance and marker light (5).
Cut brown wire (11) from button contact (8).
(7)
(8)
Install new button contact (8) to end of brown wire (11). Crimp button contact.
(9)
Install brown wire (11) through grommet (7) and front clearance and marker light (5). Seat
grommet in neck of housing.
(10) Install lamp (9).
(11) Thread brown wire (11) through tubing (12).
(12) Install tubing (12), brown wire (11), and front clearance and marker light (5) through hole in
bracket (3). Install front clearance and marker light with two screws (6).
CAUTION
Use caution when installing tubing
(12) under clips (13). When securing
tubing under clips, a soft-faced ham-
mer should be used to tap clips back
into place. Improper handling of clips
will cause them to break.
(13) Bend tubing (12) to fit under four
clips (13). Bend clips to secure
tubing.
4-64