TM 9-2330-384-14&P
4-80. PIPING ASSEMBLY, FRONT PORT, AND REAR INLET MAINTENANCE.
a.
Removal of Front Port Components
d.
Installation of Rear Inlet Components
e.
b.
Installation of Front Port Components
Removal of Piping Assembly
Removal of Rear Inlet Components
c.
f.
Installation of Piping Assembly
Equipment Conditions:
Materials/Parts:
Ref Conditions
Three gaskets
l
Eight lockwashers
l
Sixteen locknuts
l
Tools:
Grease
(Item 12. Appendix E)
l
Tool kit, general mechanic's
Personnel Required: Two
l
Jackstand
l
Wire cutter
l
a. REMOVAL OF FRONT PORT COMPONENTS
(1)
Remove dust cap (15) from adapter (3). Inspect dust cap gasket for damage. If damaged,
remove and discard.
If dust cap (15) is damaged, cut cable and remove dust cap.
(2)
4-260
