TM 9-2330-384-14&P
F-3.
EXPLANATION OF COLUMNS (SECTIONS II AND Ill) (Con't).
Recoverability
Application/Explanation
Codes
Z
-
Nonreparable item. When unserviceable, condemn and dispose of the item at
the level of maintenance shown in the 3d position of the SMR code.
O
-
Reparable item. When uneconomically reparable, condemn and dispose of
the item at unit level.
F
-
Reparable item. When uneconomically reparable, condemn and dispose of
the item at the intermediate direct support level.
H
-
Reparable item. When uneconomically reparable, condemn and dispose of
the item at the intermediate general support level.
D
-
Reparable item. When beyond lower level repair capability, return to depot.
Condemnation and disposal of item not authorized below depot level.
A
-
Item requires special handling or condemnation procedures because of
specific reasons (e.g., precious metal content, high dollar value, critical ma-
teriel, or hazardous materiel). Refer to appropriate manuals/directives for
specific instructions.
c. CAGEC [Column (3)]. The Commercial and Government Entity (CAGE) Code (C) is a
5-digit alphanumeric code which is used to identify the manufacturer, distributor, or Government
agency, etc., that supplies the item.
NOTE
When you use an NSN to requisition an item, the item you receive may have
a different part number from the part ordered.
d. PART NUMBER [Column (4)]. Indicates the primary number used by the manufacturer
(individual, company, firm, corporation, or Government activity), which controls the design and
characteristics of the item by means of its engineering drawings, specifications standards, and
inspection requirements to identify an item or range of items.
e. DESCRIPTION AND USABLE ON CODE (UOC) [Column (5)]. This column includes the
following information:
(1)
The Federal item name and, when required, a minimum description to identify the
item.
(2)
Spare/repair parts that make up an assembled item are listed immediately following
the assembled item line entry.
(3)
Part numbers for bulk materiels are referenced in this column in the line item entry for
the item to be manufactured/fabricated.
(4)
When the item is not used with all serial numbers of the same model, the effective
serial numbers are shown on the last line(s) of the description (before UOC).
(5)
The usable on code, when applicable (see paragraph F-5, Special information).
(6)
The statement "END OF FIGURE" appears just below the last item description in Col-
umn 5 for a given figure in both Section II and Section Ill.
F-4