TM 9-2330-386-14&P
3-8 TIRE REMOVAL AND INSTALLATION (CONT) .
NOTE
If only the outer tire is being removed, omit steps (8)
through (11) below.
(8) Lower jack until inner tire (4) touches the ground.
( 9 ) L o o s e n , b u t d o n o t r e m o v e t e n l u g s ( 3 ) . I f necessary, use wrench bar
between handles of lug wrench for additional leverage.
(10) Jack up axle until inner tire (4) clears the ground.
(11) Remove ten lugs (3) and inner tire (4).
b.Installation.
NOTE
I f o n l y the outer tire was removed, go to step (4).
(1) If removed, install inner tire (4) and ten lugs (3). Tighten lugs.
Lower jack until inner tire (4) touches
(2)
the ground. Tighten lugs (3) in
sequence shown.
Jack up axle until inner tire (4)
(3)
clears the ground.
W i t h valve stem 180 degrees from valve
(4)
stem of inner tire (4), install outer
tire (2) and ten lug nuts (1). Tighten
lug nuts.
Lower jack until tires touch ground.
(5)
Tighten lug nuts (1) in sequence shown.
(6)
Stow jack, lug wrench, and wrench bar in storage box.
(7)
Remove float pad and wheel chocks and stow in brackets.
(8)
TASK ENDS HERE
3-15