TM 9-2330-386-14&P
4-30 MULTI-FUNCTION VALVE.
This task covers removal, installation, and testing.
INITIAL SETUP
Tools
Equipment Condition
N o . 1 common tool kit
Para. 3-6 Drain cocks open.
Material/Parts
Tie strap
S e a l i n g compound (item 12, Appendix E)
S o a p (item 17, Appendix E)
a. Removal.
(1) Set wheel chocks on both sides
of vehicle and open drain cocks.
(2) Cut and remove tie strap (1)
securing hoses (2). Discard tie
strap.
(3) Loosen and disconnect swivel end
of hoses (2) from multi-function
valve (10).
(4) Press collar (3) against elbow
(4) and pull tubing (5) from
elbow (4).
(5) Repeat step (4) to disconnect
tubing (6 and 8).
(6) Remove multi-function valve (10)
and pipe nipple (11).
( 7 ) Remove elbows (4 and 7), tee
(9), and adapters (12) from
multi-function valve (10).
b.Installation.
( 1 ) Apply sealing compound to threads on elbows (4 and 7), tee (9), pipe
n i p p l e ( 1 1 ) , and adapters (12).
(2) Install elbows (4 and 7), tee (9), pipe nipple (11), and adapters (12)
in multi-function valve (10).
4-55