Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARNING
Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before
working around trailer. Jewelry may catch on equipment or may short across an
electrical circuit. Failure to comply may result in serious injury or death to personnel
8.
RIGHT BLACKOUT
3.
Check for 18-26 vdc at
1.
Connect 24 vdc
TAILLIGHT DOES NOT
blackout taillight lamp
intervehicular cable to trailer
ILLUMINATE - CONTINUED
socket center contact.
2.
Loosen six screws, cover,
and preformed packing from
housing. Discard preformed
packing.
3.
Remove blackout taillight
from socket.
4.
Set digital multimeter to vdc.
5.
Connect positive (+) probe
of digital multimeter to
marker light socket center
contact.
6.
Connect negative (-) probe
of digital multimeter to a
known good ground.
0036 00-55


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business