Custom Search
|
|
|
||
 TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8.
RIGHT BLACKOUT
4.
If continuity is not present,
TAILLIGHT DOES NOT
replace composite taillight
ILLUMINATE - CONTINUED
assembly (WP 0049 00). If
continuity is present, replace
blackout lamp (WP 0049
WARNING
Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before
working around trailer. Jewelry may catch on equipment or may short across an
electrical circuit. Failure to comply may result in serious injury or death to personnel
5.
Check for 18-26 vdc at
1.
Disconnect connector J260
connector J260.
from blackout taillight
connector.
2.
Connect positive (+) probe
of digital multimeter to
connector J260.
3.
Connect negative (-) probe
of digital multimeter to a
known good ground.
4.
Position towing vehicle main
light switch to BO DRIVE
and note reading on digital
multimeter.
0036 00-57
|
||
|
||
