Custom Search
|
|
|
|
||
|
||
 TM 9-2330-394-13&P
BRAKE SYSTEM TROUBLESHOOTING - Continued
0037 00
BRAKE SYSTEM - Continued
Table 1. Brake System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8.
If towing vehicle is not FMTV
15. ANTI-LOCK BRAKING
A1, position main light
SYSTEM (ABS) DIAGNOSTIC
switch to OFF.
TOOL BLINKS 14 TIMES IN
SERIES: ABS SYSTEM
CONFIGURATION OR POWER
SUPPLY FAULT - CONTINUED
9.
Shut down towing vehicle
engine.
10. If 18-26 vdc is not present,
replace 24 vdc intervehicular
cable.
5.
Check to see if continuity is
1.
Open voltage converter box
present through receptacle
cover (WP 0053 00).
pin MS-750231 pin K.
2.
Set digital multimeter to
ohms.
3.
Connect positive (+) probe
of digital multimeter to pin K
on outside of receptacle MS-
75021.
4.
Connect negative (-) probe
of digital multimeter to pin K
on inside of receptacle MS-
75021 and note
0037 00-73
|
||
|
||
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
