Custom Search
|
|
|
||
 TM 9-2330-394-13&P
CLEARANCE AND MARKER LIGHT ASSEMBLIES
0050 00
REPLACEMENT - Continued
CLEARANCE AND MARKER LIGHT REMOVAL (Incandescent Model) - Continued
5.
Disconnect plug (11) from connector J254 (12).
6.
Remove nut (13), lockwasher (14), terminal lug TL266 (15), nut (16), lockwasher (17), screw (18) and
base (3) from trailer. Discard lockwashers.
7.
Remove gasket (19) from trailer.
CLEARANCE AND MARKER LIGHT INSTALLATION (Incandescent Model)
NOTE
Install plastic cable ties as required.
All clearance and marker lights are installed the same way. Right marker light shown.
Clearance and marker connectors are:
Right front clearance connector ................
J250:TL262
J251:TL263
Left front clearance connector...................
J255:TL267
Right rear clearance connector .................
J256:TL268
Left rear clearance connector....................
Left marker light ......................................
J252:TL264
Center marker light ..................................
J253:TL265
Right marker light ....................................
J254:TL266
0050 00-3
|
||
|
||
