Custom Search
|
|
|
||
 TM 9-2330-394-13&P
BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR - Continued
0056 00
REMOVAL - Continued
WARNING
Brake shoes may be covered with dust. Breathing the dust may be harmful to
your health. Do not use compressed air to clean brake shoes. Wear a filter
mask approved for use against brake dust. Failure to comply may result in
injury to personnel.
NOTE
Identify anchor and adjusting plunger locations prior to disassembly.
Anchor plungers and adjusting plungers are opposite each other in each plunger
housing. The positions are reversed for opposite sides of the wheel. Perform the
following procedure to disassemble both plunger assemblies.
2.
Remove guide screw (3) and lockwasher (4) from plunger housing (5). Discard lockwasher.
3.
Remove seal (6) and anchor plunger (7) from plunger housing (5).
0056 00-2
|
||
|
||
