Custom Search
|
|
|
||
 ANTI-LOCK BRAKING SYSTEM (ABS) POWER AND DIAGNOSTIC
0073 00
CABLE REPLACEMENT (Vehicles S/N 15,676 and Higher) - Continued
INSTALLATION
NOTE
ABS power and diagnostic cable is routed with, and plastic cable tied to, electrical cable
assembly. Install plastic cable ties as required.
1. Route ABS power and diagnostic cable (13) through bulkhead opening (41).
2. Position ABS power and diagnostic cable (13) in convoluted tubing (40).
3. Position compression fitting collar (36) and choke seals (37 and 38) on ABS power and diagnostic
cable (13).
4. Position ABS power and diagnostic cable (13) in voltage converter box (27).
NOTE
Do not tighten compression collar at this time.
5. Position choke seals (37 and 38) in compression fitting (39) with compression collar (36).
0073 00-8
|
||
|
||
