Custom Search
|
|
|
||
 TM 9-2330-394-13&P
WHEEL STUD REPLACEMENT - Continued
0077 00
INSTALLATION
1.
Install wheel stud (2) in wheel hub (1).
NOTE
Use a nut that was removed during wheel removal to perform steps (2) through (7).
2.
Install nut (3) on wheel stud (2) with flat side of nut toward wheel hub (1).
3.
Tighten nut (3) until wheel stud (2) is seated in wheel hub (1) as far as threads will allow.
4.
Remove nut (3) from wheel hub (1).
5.
Install nut (3) on wheel stud (2) with beveled side of nut (3) toward wheel hub (1).
6.
Tighten nut (3) until wheel stud (2) is seated in wheel hub (1).
7.
Remove nut (3) from wheel hub (1).
0077 00-3
|
||
|
||
