Custom Search
|
|
|
||
 TM 9-2330-394-13&P
WHEEL BEARING/HUB SEAL REPLACEMENT - Continued
0080 00
INSTALLATION - Continued
NOTE
Ensure inner wheel bearing nut is installed on spindle with nub facing out from wheel
end hub.
12. Position inner wheel bearing nut (9) on spindle (12).
CAUTION
Rotate wheel end hub to the left and to the right while tightening wheel bearing nut.
Failure to comply may result in damage to equipment.
13. Tighten inner wheel bearing nut (9) to 200 lb-ft (271 Nm).
14. Loosen inner wheel bearing nut (9) one full turn (360 degrees).
CAUTION
Do not over tighten inner wheel bearing nut. Failure to comply may result in damage to
equipment.
15. Tighten inner wheel bearing nut (9) to 50 lb-ft (68 Nm).
0080 00-10
|
||
|
||
