Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
LEAF SPRING (LMTVT) REPLACEMENT - Continued
0100 00
INSTALLATION
NOTE
Left and right side resilient mounts are installed the same way. Right side shown.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in a well-ventilated area. If
adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water. Failure to comply may result in injury to
personnel.
1. Apply sealant to threads of stud (26).
2. Position stud (26) in upper spring mount plate (24).
3. Position resilient mount (25) on stud (26).
4. Tighten resilient mount (25) 1 turns after contact with upper spring mount plate (24).
0100 00-8


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business