TM 9-2330-394-13&P
CARGO BED REPLACEMENT - Continued
0103 00
INSTALLATION
WARNING
Lifting beam arms weigh approximately 75 lbs (34 kgs). Attach a suitable lifting
device prior to installation. Failure to comply may result in injury to personnel or
damage to equipment.
NOTE
All four lifting beams are installed the same way. Left front shown.
1.
Position lifting beam arm (19) in front lifting beam (3).
2.
Position lanyard (23) on lifting beam arm (19) with bolt (22) and nut (21).
Tighten nut (21) to 23-29 lb-ft (31-39 Nm).
3.
4.
Install two pins (18) in front lifting beam (3).
5.
Perform Steps (1 through 4) on three remaining lifting beam arms (19).
0103 00-10