TM 9-2350-222-10-2
ENGAGE TARGET WITH 165-MM MAIN GUN (LOAD)
Make Sure:
MAIN GUN switch (A) is set to OFF.
Indicator tape on replenisher shows one rough edge and one
smooth edge (2-108).
1.
Set safety switch (B) to SAFE.
2.
Push down and hold plunger (C).
3.
Pull back BREECH OPERATING
HANDLE
(D)
until
breechblock (E) is locked open.
WARNING
Be sure BREECH OPERATING HANDLE (D) is
latched. An unlatched handle can injure you
and damage equipment.
4.
Return BREECH OPERATING HANDLE (D) to original
position. Make sure it latches.
5.
Check that chamber (F) is empty and clean.
Change 3 2-496