TM 9-2350-222-10-2
PERFORM POST-OPERATING PROCEDURES (TURN OFF EQUIPMENT) - Continued
a.
Using GUNNER'S POWER CONTROL handles (A),
traverse turret (page 2-504) so main gun is over driver's
compartment.
b.
Set ELEV/TRAV POWER switch (B) to OFF.
c.
Make sure loader locks turret lock (page 2-568).
d.
Inform driver it is safe to stow periscope
WARNING
Make sure driver is clear of turret floor before
unlocking turret lock and turning ELEV/TRAV
POWER switch to ON.
2.
Request loader to unlock turret lock (page 2-331).
3.
Set ELEV/TRAV POWER switch (B) to ON.
4.
Using GUNNER'S POWER CONTROL handles (A), traverse
turret (page 2-504) until main gun is over rear of vehicle.
5.
Set ELEV/TRAV POWER switch (B) to OFF.
Change 4 2-542.1/(2-542.2 blank)