TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (SLAVE STARTING) - Continued
NOTE If you do not have time to charge batteries, go to page 2-616.
To Charge Dead Vehicle's Batteries:
Live vehicles:
1. Set engine to run above idle. (If using a single CEV or tank, set
engine to run at 1000 to 1200 rpm. See operator's manual of
other vehicles for correct rpm.)
2.
Set MASTER BATTERY switch (E) (for track vehicles) or
MASTER switch (for wheeled vehicles) to ON.
3. Let engine run for up to 30 minutes if you have time.
4. Return engine speed to normal idle (750 rpm for CEV or tank.
See operator's manual of other vehicles for correct rpm.)
TA132754
2-615
