TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PREPARE TWO VEHICLES FOR TOWING) Continued
NOTE
It will be necessary to reposition towing vehicle
to aline tow bar (AF) and pintle assembly (AN).
9. Lower tow bar (AF) onto pintle hook (AN).
10.
Pull release latch (AP) away from vehicle to lower pintle
assembly (AN) back into locked, closed position.
11. Insert cotter pin (AM) back into pintle assembly to lock.
CAUTION
If engine or transmission of disabled vehicle is
damaged, or if vehicle will be towed more than
one mile, disconnect universal joints from final
drives.
Vehicle will have no brakes with
universal joints disconnected. If towing with
cables, use third vehicle for braking purposes.
Remove blocks from roadwheels and tracks
before moving vehicle.
TA132768
2-629
