TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PREPARE TWO VEHICLES FOR TOWING) Continued
11. Repeat steps 3 thru 5 on left front tow eye of braking vehicle.
NOTE
One cable is not long enough for connection under moldboard. Use two tow cables to make connection.
12. Remove locking pin (AX) from shackle pin (AY).
14. Using shackle assembly, connect two tow cables (AR) together.
13. Remove shackle pin (AY) from shackle (AZ).
15. Install shackle pin (AY) into shackle (AZ).
16. Install locking pin (AX) into shackle pin (AY).
TA132775
2-636
