TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (CONCLUDE TOWING)
To Remove Tow Bar:
NOTE
Four men are needed to
perform the following steps.
1.
Set parking brakes on disabled vehicle
(A).
2.
Go to right front fender box (B) on
disabled vehicle. Get hand hammer (C)
and 8 inch pliers (D).
3.
Go to rear of towing vehicle (E). Locate
pintle assembly (F).
4.
Pull cotter pin (G) from pintle assembly
(F).
5.
Move towing vehicle (E) forward until pressure is off of
tow bar at pintle assembly (F).
6.
TA132791
2-652