TM 9-2350-222-10-3
REPLACE INTERIOR LAMPS (REPLACE POWERPLANT WARNING LAMP) - Continued
7.
Push good lamp (G) into socket
(F). Turn clockwise until tight.
8.
Using wrench (A), screw adapter
(D) with gasket (E) into socket.
9.
Screw lens cap (C) clockwise onto
adapter (D), until tight.
10.
Return wrench to tool bag in right
front fender box.
To Test POWERPLANT WARNING LAMP After Lamp Replacement:
1. Set MASTER BATTERY switch
(B) to ON. POWERPLANT
WARNING LAMP (G) should light.
2. Set MASTER BATTERY switch
(B) to OFF.
3. If lamp failed to light, notify
organizational maintenance.
TA133121
3-291