TM 9-2350-277-10
FUEL CARRIER -- Continued
0025 00
CAUTION
Contamination can damage fuel system. Remove dirt and water from fuel filler area before
opening fuel filler cap.
4.
Remove any dirt and water from around fuel filler cap. Use wiping rag.
NOTE
Carrier may have optional cap with pressure relief valve.
5.
Remove fuel filler cap. If fuel cap has pressure relief valve, cap is removed by lifting pressure relief handle on fuel cap
and turning cap counterclockwise.
6.
Remove fuel filler neck screen from fuel filler neck.
7.
Check fuel filler neck screen for damage and remove any dirt and debris. If fuel filler neck screen is damaged, notify
unit maintenance.
8.
Install fuel filler neck screen in fuel filler neck.
WARNING
Sparks from static electricity could cause a fire or explosion. Metal nozzle must touch metal in
fuel filler neck when fueling carrier or ground wire must be installed to carrier being fueled.
9.
Insert fuel nozzle in fuel filler neck. Fill fuel tank allowing 5 inches (13 cm) in fuel filler neck for expansion.
10. Remove fuel nozzle from fuel filler neck.
0025 00-3
Change 4
