TM 9-2350-277-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES -- Continued
0090 00
ITEM
INTERVAL
MAN-
ITEM TO BE
CREWMEMBER
EQUIPMENT
NO.
HOUR
CHECKED OR
PROCEDURE
NOT READY/
SERVICED
AVAILABLE
IF:
b.
Check power cable electrical connector for
bent or missing pins or bare wires. Report
damaged connector to unit maintenance.
Attach power cable to DNV receptacle.
92
Weekly
Bilge Pumps
NOTE
Rear bilge pump is below rear floor
plate. Front bilge pump is in left front
corner of power plant compartment.
a.
Check bilge pumps weekly and before any
water operations as follows:
1) Turn MASTER SWITCH to ON.
2) Turn BILGE PUMPS switch to ON.
Make sure front and rear bilge pump
lights are on.
0090 00-117
Change 4
