TM 9-2350-277-10
BREAK/JOIN T150 TRACK -- Continued
0092 01
NOTE
Use crowbar to align track as necessary.
Tighten two track fixtures evenly until ends of track are close enough to install track alignment tool.
2.
Place the track alignment tool over one pin on the outside shoe and rest it on the other pin. Tighten both track fixtures
3.
evenly to pull the track assembly together until the track alignment tool fits over and seats fully on both track shoe pins.
Install the second track alignment tool on the inside track shoe pins, leave on the inside track fixture.
4.
Remove the outside track fixture. Both track alignment tools will hold the track together. Leave the track fixture on
the inside of the track assembly.
0092 01-7
Change 4
