TM 9-2350-277-10
CHECK CARRIER BATTERIES -- Continued
0095 00
NOTE
Do Step 4 and Step 5 for M577A3 only.
4.
Remove strap from table top and battery box. Pull rod downward from securing clip. Raise table top and use rod to
secure table top up while performing any maintenance or inspection of batteries.
5.
Remove two wing nuts that secure battery box cover to battery box. Remove battery box cover.
NOTE
Do Steps 6 - 8 for M1068A3 only.
6.
Loosen two nuts and swivel bolt off extension base bracket.
7.
Push lever towards the right side wall and put lever in latch position. Raise extension base and secure with strap. The
guide has a position for the lever in the locked position and in the released position.
0095 00-4
Change 2
