2
SECURE THE FREE LOOP OF EACH CABLE
1
OPEN CABLE LOCKS AND DETACH FREE
AROUND A TRACK END CONNECTOR
LOOP OF CABLE ASSEMBLY (FIG. 2-6).
LOCATED AT A POINT ON TOP OF THE
COMPENSATING IDLER WHEEL.
4
ENGAGE CARRYING HOOKS. DRIVE TANK
3
PLACE MOLDBOARD CONTROL HANDLE IN
FORWARD SLIGHTLY, REMOVE CABLES
'F" POSITION AND DRIVE TANK SLOWLY IN
FROM TRACK END CONNECTORS, AND
REVERSE UNTIL MOLDBOARD IS FULLY
PLACE CABLES IN STOWED POSITION.
ELEVATED.
AT 19639
Figure 2-7. Emergency lifting procedure
2-11
