Blackout drive lamp
32cp, 24-28V, no. 1683
height of the moldboard to facilitate light projection
Blackout marker lamp 3 cp, 24-28V, No. 1251
when moldboard is in raised position. Each headlight
cluster has two seal-beam units: a service drive
3.58. Replace of Brush Guards
headlight and a blackout drive (infrared) headlight. The
blackout drive unit is a standard seal-beam lamp with a
for removal and installation instructions.
special infrared filter placed on the light beam. A
3-60. Replacement of Headlight and Adapter.
hooded blackout drive lamp and a blackout marker lamp
complete the headlight assembly. The blackout drive
for removal and installation instruction.
lamp is connected to the vehicle power on the left side
3-62. Cleaning Inspection and Repair . Refer to TM
only.
9-2350-224-20 for cleaning, inspection and repair and
3-57.
Data.
replacement instructions.
Headlight Assemblies
3-63. Disassembly and Assembly. Refer to TM 9-
Service drive
2350-224-20 for disassembly and assembly.
headlamp
24V sealed beam, no. 4811
3-64. Headlight Adjustment. Refer to TM 92350-
Blackout drive (infrared)
224-20 for headlight adjustment.
headlamp
24V seed beam, no. 4811
3-30
