PRELIMINARY PROCEDURE:
LOWER MOLDBOARD TO GROUND.
STOP VEHICLE ENGINE AND APPLY BRAKES.
DRAIN HYDRAULIC SYSTEM (FIGS. 3-21 AND 3-22).
REMOVE HYDRAULIC SYSTEM ARMOR GUARDS
DISCONNECT ELBOWS FROM RESERVOIR ASSEMBLY
REMOVE/INSTALL
FOUR
SCREWS
AND
REMOVE/INSTALL
FOUR
SCREWS,
LOCKWASHERS SECURING TROUGH ASSEMBLY
LOCKWASHERS, AND WASHERS
SECURING
FROM/TO MOUNTING PADS ON FENDER.
RESERVOIR ASSEMBLY FROM/TO
MOUNTING
PADS ON FENDER.
REMOVE/POSITION TROUGH ASSEMBLY FROM/TO
MOUNTING
PADS.
REMOVE/POSITION RESERVOIR ASSEMBLY.
AT 19673
Figure 3-33. Removal or installation of hydraulic assembly.
3-48
