TM9-4110-254-14
(4)
Install grommets (17) and tie down straps (16) as necessary.
(5)
Slip clamp (14) over sensing bulb (18).
(6)
Install clamps (14) and (15), bolt (13), new lock washer (12) and new self locking nut (11).
(7)
Install sensing bulb bracket (10), flat washers (9), new lock washers (8), and two bolts (7).
(8)
Install circuit breaker cover (6) and secure with new lock washers (5) and two screws (4).
(9)
Close control panel (3) and install two new lock washers (2) and bolts (1).
(10) Apply silicone RTV into grommets (17) to seal evaporator enclosure.
NOTE
FOLLOW-ON MAINTENANCE:
Unlatch and close control box cover door.
Install cover panel (para 4-16)
Connect power and put unit back into service.
4-39
