TM 9-4110-254-14
5-43. FRAME REPAIR
This task covers.
Repair
INITIAL SETUP
Equipment Conditions
General Safety Instructions
WARNING
disconnected
High voltage and rotating parts are used m
the refrigeration unit Personal injury can
result if power is connected
Repair
NOTE
Repair to condenser frame at this maintenance level is limited to
replacement of any damaged rivets or blind rivet nuts
(1)
Drill through rivet or blind rivet nut using drill bit slightly smaller than rivet diameter
(2)
Remove any remaining rivet material
(3)
Install new rivet or blind rivet nut as required
5-94