TM 9-4110-256-14
5-35. EVAPORATOR COIL REPLACEMENT .
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools:
Equipment Conditions:
Gloves
Materials/Parts:
Lock Washers (12)
a. Removal.
(1) Loosen flare nut (1) and move copper tubing (2) to the side being careful not to kink or bend tubing.
WARNING
Coil fins are sharp and can cut hands or fingers. Wear gloves to prevent personal injury when
handling coil.
(3) Remove 12 bolts (5), lock washers (6), and evaporator coil (4). Discard lock washers.
b. Installation.
WARNING
Coil fins are sharp and can cut hands or fingers. Wear gloves to prevent personal injury when
handling coil.
(1) Install evaporator coil (4), 12 new lock washers (6), and bolts (5).
(3) Aline copper tubing (2) and tighten flare nut (1).
5-64