ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010 7053-AC
AIR FORCE TO 35E9-136-21
5.28 DAMPER ACTUATOR SERVICE VALVE (V1). - Continued.
REMOVAL - Continued
e.
Remove flarenut and line (7) from actuator (8).
f.
Debraze tubing (6) and (9) at joints (paragraph 5.12).
g.
Remove two rivets (4) and bracket (5).
h.
Debraze damper actuator service valve (10) from bracket (5) (paragraph 5.12).
INSTALLATION
a.
Remove valve caps (1) and (2).
b.
Braze damper actuator service valve (10) onto bracket (5) (paragraph 5.12).
c.
Install bracket (5) with two rivets (4).
d.
Braze tubing (6) and (9) at joints (paragraph 5.12).
e.
Install actuator line with flarenut (7) handtight.
f.
Crack (backseat counterclockwise, one turn) damper actuator service valve (3), let gas escape 1-3 seconds and
tighten flarenut.
g.
Backseat (counterclockwise) damper actuator service valve (3).
h.
Install valve caps (1) and (2).
FOLLOW ON PROCEDURES
a.
Perform start up after repairs (paragraph 5.20).
b.
Leak test all newly connected joints and those in the repair area (paragraph 5.13).
c.
Connect air conditioner input power at source.
d.
Check refrigerant level and charge If necessary (paragraph 5.15).
5-60
