ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010 7053-AC
AIR FORCE TO 35E9-136-21
5.39. RECEIVER. This task covers inspection, removal, repair and installation.
INITIAL SETUP
Tools:
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Personnel: 1
Equipment Conditions:
Disconnect input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL. Shutting the unit off at the control panel does
not disconnect unit power.
(1) Disconnect air conditioner input power at source;
(2) (2) Discharge refrigerant system (paragraph 5.10); and
(3) (3) Remove compressor (paragraph 5.37).
INSPECTION
a.
Inspect for evidence of leaks damaged lines and loose or missing mounting hardware (see fig. 5-30).
b.
If a leak Is suspected or indicated test per paragraph 5.13.
c.
Check fusible plug (9) for leaks. If leaks are detected replace fusible plug.
REMOVAL
a.
Frontseat (clockwise) receiver service valve (5).
b.
Remove valve caps (4) and (6).
c.
Remove screw (10) nut (2) and bracket (1).
d.
Debraze tubing (3) and (7) at joints (paragraph 5.12).
e.
Remove receiver (8).
REPAIR
Repair consists of replacing fusible plug (9).
5-97
