ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-21
6.9
EVAPORATOR COIL. - Continued
REPAIR/REPLACE
Repair consists of brazing (paragraph 5.12) damaged tubes. straightening damaged fins with fin comb or replacing coil.
INSTALLATION
a.
Braze distributor (9) to coil (paragraph 5.12).
b
Place and support evaporator coil assembly (8) in mounting position.
c.
Install five rivets (5) securing evaporator assembly to right frame.
d.
Pull wring harnesses (3) up to evaporator compartment (1).
e.
Connect wire leads tagged in removal to heater assembly.
f.
Reinstall air differential hose (2).
g
Braze tubing (4 and 7) at joints (paragraph 5.12).
h.
Pull liquid quench sensing bulb up to evaporator compartment (1).
i.
Install liquid quench sensing bulb (paragraph 5.31).
j.
Install solenoid assembly L1 (paragraph 5.29) to bracket.
k.
Install new drier filter (paragraph 5.23).
l.
Install primary expansion valve to mounting bracket (paragraph 5.30).
FOLLOW ON PROCEDURE
Install left frame panel (paragraph 6.7).
6-16
