TM9-4120-400-14
]
[
DEHYDRATOR (FILTER/DRIER).
5-20.
This task covers:
Replacement
INITIAL SETUP
Equipment Condition
Tools
Refrigeration Unit Service Tool Kit
Materials/Parts
Dehydrator
Figure 5-16. Dehydrator (Filter/Drier)
REPLACEMENT
1. Remove four screws (1) and two mounting clamps (2).
2. Disconnect two flare nuts (3) and remove dehydrator(4) from unit.
Replacement dehydrators are packaged with sealing caps on the flare fittings to prevent
moisture contamination of the desiccant filtering media. Remove these caps immediately
prior to installation. Never install a dehydrator from which caps have been removed for an
extended or unknown period of time.
5-51