TM9-4120-400-14
5-35 COMPRESSOR. - continued
4.
Check continuity between pins A and B, B and C, and A and C. There should be continuity between each pair
of pins. If there is no continuity the compressor motor is bad. Replace compressor.
Check continuity between pins A, B, and C and the compressor body. No continuity should exist. If continuity
5.
exists the compressor motor is bad. Replace compressor.
Inspect J10 connector for loose, broken, or otherwise damaged pins or connector threads. Replace if
6.
damaged.
REPAIR
Figure 5-32. Compressor Repair
5-76