TM 9-4120-402-14
4-31. FAULT INDICATOR, LIGHT EMITTING DIODE (DS1, DS2, DS3, AND DS4). - continued
Figure 4-32. Light Emitting Diodes (DS1, DS2, DS3, & DS4)
c.
Replace.
(1) Tag lead and release and remove contact pin from connector (7).
(2) Tag leads and cut cap splice off wire bundle.
(3) Carefully push light emitting diode (6) out of control panel (4).
(4) Carefully push light emitting diode (6) into control panel (4).
(5) Crimp new connector P6 pin onto black light emitting diode (6) ad and insert into connector (7).
el
(6) Strip red leads and bundle using cap splice.
(7) Remove tags.
(8) Secure control panel (4) to box (5) using four sets of screws (1), lock washers (2), and flat washers (3).
NOTE
FOLLOW-ON MAINTENANCE:
Install control panel (para 4-27).
Connect power at power source.
4-99
