TM 9-4120-402-14
5-23. CONDENSER COIL. - continued.
(2)
(3)
Remove four sets of screws (4) and lock washers (5). Remove receiver bracket (6).
(4)
Remove four screws (7) securing condenser coil bracket (8) to unit.
(5)
Remove four screws (9) securing condenser coil bracket (10) to unit.
(6)
Remove eight screws (11). Remove condenser coil brackets (8) and (10).
(7)
Carefully pull coil (1) and attached tubing from unit.
(8)
Debraze tubes (12) and (13) to remove receiver (14) assembly from coil (1). (See paragraph 5-13.)
(9)
(11) Braze tubes (12) and (13) of receiver assembly (14) to coil (1). (See paragraph 5-13.)
(12) Being careful not to damage tubing, place coil (1) into unit.
(13) Position condenser coil brackets (8) and (10) in place and secure to coil with eight screws (11).
(14) Secure condenser coil brackets (8) and (10) to unit with four screws each (7) and (9).
(15) Position receiver bracket (6) in place. Secure with four sets of screws (4) and lock washers (5).
NOTE
FOLLOW-ON MAINTENANCE:
5-62