TM 9-4120-403-14
Removal
Remove four screws, locknuts, and cover plate.
Inspection
Check that cover is not bent, cracked, or punctured. If damaged, replace cover.
Installation
Aline mounting holes and install cover plate with four screws and locknuts.
Follow-on procedure: Replace Junction Box. (See para 4-32.)
4-15. CIRCUIT BREAKER ACCESS PLATE
This task covers:
a. Removal
c. Repair
b. Inspection
d. Installation
INITIAL SETUP
Tools
General Safety Instructions
Tool Kit, Refrigeration
(Appendix B item 1)
WARNING
Materials/Parts
Apron
Toluene is flammable, and its vapors can
(Appendix E item 5)
be explosive. Repeated or prolonged skin
Respirator
contact or inhalation of vapors can be
(Appendix E item 6)
toxic. Use in a well-ventilated area, and
Goggles
keep away from sparks or flame. Use
(Appendix E item 7)
goggles, gloves and apron when
Gloves, Protective
appropriate.
(Appendix E item 8)
Toluene
(Appendix E item 9)
Adhesive
Gasket
(Appendix F item 3)
4-30
