TM 9-4120-403-14
5-6. EVAPORATOR AND CONDENSER FAN MOTOR (B2)
This task covers:
a. Repair
INITIAL SETUP
Tools
Tool Kit, Refrigeration
(Appendix B item 1)
Solder Gun Kit
(Appendix B item 6)
Materials/Parts
Solder
Oil
Equipment Conditions:
Fan Motor Removed (para 4-57)
Repair
NOTE
Direct support maintenance repair of the fan motor is limited to the replacement of electrical plug,
bearings, rotor with shaft, and hardware items. Disassemble motor only as necessary to do required
repair. (See figure 5-4.)
a. Connector (J2)
(1) Remove four screws from connector (J2).
(2) Pull connector away from terminal box as far as wires will allow.
(3) Tag and unsolder wire leads.
(4) Remove old connector.
5- 10
