TM 9-4120-404-14
3-26. INFORMATION PLATES.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools Required
Tool Kit, Service, Refrigeration, Unit (Item 1, Appendix B)
Riveter, Blind, Hand (Item 2, Appendix B)
Drill, Electric, Portable (Item 2, Appendix B)
Drill Set, Twist (Item 2, Appendix B)
Material/Parts Required
Rivets (Refer to TM 9-4120-404-24P)
Soap (Item 14, Appendix E)
Equipment Condition
Air conditioner shut down and cool.
(1) Drill out four rivets (1) and information plate (2) from side of unit (3).
(2) Drill out eighteen rivets (4) and information plates (5), (6), (7), and (8).
(3) Remove identification plates (9), (10), (11), and (12) from side of unit (3).
b. Installation.
(1) Clean area on side of unit (3) with soap and water where identification plates (12), (11), (10), and (9) will be
installed.
(2) Install information plates (12), (11), (10), and (9) onto side of unit (3).
(3) Position information plates (8), (7), (6), and (5) onto top unit and install eighteen new rivets (4).
(4) Position identification plate (2) into position on side of unit (3) and install four new rivets (1).
3-60
