TM 9-4120-404-14
c. For the next 2 seconds:
LED's 5 and 7 turn off.
d. For the next 2 seconds:
LED 5 shall continue to be off.
LED's 2 and 7 shall illuminate. End of routine.
9. Place S6 in the "ON" position for 2 seconds, and then place S6 in the "OFF" position. The following routine
shall occur:
a. LED 2 shall turn off; LED 7 shall remain illuminated.
b. For the next 8 seconds:
LED 6 illuminat es.
LED 7 remains illuminated.
c. For the next 2 seconds:
LED's 6 and 7 turn off.
d. For the next 2 seconds:
LED 6 shall continue to be off.
LED's 2 and 7 shall illuminate. End of routine,
10. Place S1 in the "ON" position for 2 seconds, and then place S1 in the "OFF" position. LED's 2 and 7 shall
turn off for 10 seconds; then LED's 2 and 7 shall illuminate.
11. Place S1 in the "ON" position. LED's 2 and 7 shall turn off. In 10 seconds, LED 3 shall illuminate.
12. Place S1 in the "OFF" position and reset mode switch, S7. Then turn mode switch back to "C" position. In
2 seconds, LED's 2 and 7 illuminate.
13. Place S1 in the "ON" position and in 2 seconds simultaneously place S4, S5, and S6 in the "ON" position.
LED's 2 and 7 shall turn off. In 10 seconds, LED 3 shall illuminate. Switches S4, S5, and S6 have no
effect.
14. Place all fault switches in the "OFF" position. Reset mode switch, S7, and turn back to "C" position.
Simultaneously place switches S4, S5, and S6 in the "ON" position. LED's 4, 5, and 6 shall illuminate.
After 1 second, place S1 in the "ON" position, LED's 4, 5, 6, and 7 shall turn off. After 10 seconds, LED 3
shall illuminate.
3-101
