TM 9-4120-407-14
3-40. CONDENSATE TRAPS REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions:
Service Refrigeration Unit Tool Kit
Materials/Parts
a. Removal.
(1) Loosen clamps (1), (2) and spring tension clip (3). Remove hose (4).
(2) Loosen clamp (5) and spring tension clip (6). Remove hose (7).
(3) Loosen spring tension clip (8). Remove tee (9).
(4) Loosen spring tension clip (10). Remove hose (11).
(5) Remove drain tube (12).
(6) Remove cotter pin (13), spring (14), and ball (15). Discard cotter pin.
Figure 3-60. Condensate Drain Trap
3-134