TM 9-4910-387-14-1
13 DRIVEN COUPLING (7551246) (34). Install on shaft (33).
14 TWO SETSCREWS (MS51963-103) (35 AND 36). Tighten.
15 HAND KNOB ASSEMBLY (23). Loosen.
16 FUEL INJECTOR PUMP (37).
a. Slide forward on mounting rails (21).
b. Engage driven coupling (34) with drive coupling (10) leaving
1/16-in. (0.159-cm) gap.
17 HAND KNOB ASSEMBLY (23). Tighten.
18 TWO LOCK WIRES (38), FOUR SCREWS (39), AND CAP (40).
Remove.
2-107
